The oil helps bring out wood’s beauty, while the varnish resin offers somewhat more protection against chemicals, heat, scratches and stains than either oil or wax. I have such fond memories working on projects with my parents on the weekends in the garage growing up. Should You Treat Teak Patio Furniture With Teak Oil? The only difference is that tung oil is slightly less amber and slightly more water resistant. Well, that’s exactly what the oil manufacturers want you to believe. It is also used mainly for boat, bow and arrowwood, kitchenware, and boxes woods! Danish oil, often lumped in as an oil finish, is actually a thin oil and varnish mixture. Danish oil will darken the wooden pieces slightly because it possesses penetrating characteristics, which can be mixed with oil-based solvents to create wood stains. Page 1 of 3 1 2 3 Next > Jun 30, 2011 #1. dilbone Tele-Afflicted. After the first coat is dry, you’ll probably want to repeat this process with a second coat (and possibly even a third) to reach the desired color. After explaining the differences between the various ones, I’ll tell you about my preferred non-oil method for maintaining the beautiful color of teak wood. Danish Oil vs. Tung Oil: Advantages and Disadvantages. Then with a clean cloth rag you want to work it into the wood and distribute it evenly for total coverage. In the case of linseed oil, you wipe or brush it onto the wood until it doesn’t soak any more up. These are only some simple examples. Make sure your furniture is entirely dust-free after sanding, and now you’re ready to oil. The oil component could be tung or linseed, or maybe from another type of natural oil. There are basically 2 parts to successfully treating your furniture or boat with a teak oil: Before you apply teak oil to wood furniture or boat sections, you need to clean the wood. Here is our article on how to choose a wood finish for your project. Danish oil is for all woods including Teak wood, plum, pear, walnut, willow, totara, Sapele, and many other planks of wood. After this initial coat, you need to lightly sand down the surface grain of the wood before applying a second and possibly a third coat. Meet your new boyfriend Danish Oil. Teak sealer only need be applied once per year to achieve optimal results. Tru Oil and Danish Oil both are boiled linseed oil based, they just vary in the additives blended in, the proportions. Many manufacturers are keen to market the oriental mystique of tung oil with a product that is easier for the average Joe to use, and so theyโ€™ve come up with many varieties of โ€œTung Oil Finishโ€ or โ€œTung Oil Varnishโ€.These are largely similar to teak oil in that they usually contain a combination of oil, varnish, and mineral spirits. Danish Oil gives a matt finish, whereas Teak Oil is glossier. Tung Oil vs Tung Oil Finish. Does it need a teak oil finish? Beware: Some finishes with "tung oil" in their name contain little or no real tung oil as an ingredient. Apply Briwax Oils with a cloth (or use a brush or sponge for larger areas, and wipe over with a cloth to remove any brush marks). Typical of this group is Watco®, both the oldest and best-selling. I will always have a special place in my heart for woodworking. If you can learn to love the silvery patina color that teak wood fades to when exposed to the elements, then it’s probably better for outdoor pieces to be left untreated and simply cleaned regularly. Many people confuse the different kinds of oil to be the same. For very stubborn stains, sanding is the only sure-fire way to remove them. Danish oil and teak oil can be applied with a soft brush, rag or piece of cloth, with each applied layer of oil needing to be sanded lightly with fine sandpaper. It’s suitable for interior and exterior surfaces because it beautifies the wood grain, protecting it against UV rays and water stains. This is a key step if you wish to avoid attracting mildew down the road. The companies use it as a marketing strategy to be used on teak wood furniture so it is called teak oil. It penetrates way better than other contemporary oils, and it will increase their aesthetic appeal. Teak oils feature mineral oil, tung oil, linseed oil and solvents such as In both cases, the wood is used outdoors and experiences lots of contact with the elements—water, wind, sunshine, etc. First, it’s important to understand about wood oil before diving deep into this topic – Let’s get started!eval(ez_write_tag([[468,60],'topwoodworkingadvice_com-medrectangle-3','ezslot_1',154,'0','0'])); Wood oil is a protective yet decorative coating, which applies directly over the top of wood stains or bare pieces.